All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
WhatsApp :
+8615665870097
Keywords [ lubricating oil testing equipment ] match 305 products.
ASTM D1500 GB/T6540 Lab Test Instruments Chroma Tester For Petroleum Products
K1: | ASTM D1500 |
---|---|
The Light Source: | Internal Frosted Emulsion Bulb With 220V, 100W And Temperature Of 2750±50K |
Colorimetric TubeStandard Color Wheel: | 26 Φ14 Light Holes, 25 Of Which Are Equipped With 1-25 Color Standard Glass Sheets In Sequence, 26 Holes Are Blank |
ASTM D664 Potentiometric Titration Acid Value Tester For Petroleum Products And Lubricants Determination
MODEL: | SH108C |
---|---|
Standard: | ASTM D664, ASTM D2896, ASTM D974 |
Measuring Range: | ≥0.001 MgKOH/g |
SH117 Over-Wide Temperature Range Lubricating Grease ASTM D2265 Dropping Point Apparatus
MODEL: | SH117 |
---|---|
Power Supply: | AC220V±10% 50Hz |
Input Power: | 800W |
Lubricating grease (Vaseline) cone penetration test SH017 full-automatic constant temperature cone penetration tester
MODEL: | SH017 |
---|---|
Measurement Range: | 0-680 Cone Penetration |
Resolution: | 0.01 Mm |
SD-4929A Portable Lubricating Grease Oil Bath Dropping Point Tester ASTM D566
The Inner Diameter Of The Fat Cup: | ∮9.92mm |
---|---|
The Height Of The Cup: | Is 12mm |
The Drip Hole: | Is ∮28mm |
ASTMD566 Lubricating grease drop point tester (oil bath) with dual hole temperature measurement of 270 degrees
MODEL: | SD-4929A |
---|---|
Power Supply: | AC 220 V±10%, 50 Hz |
Stirring Motor: | Rotating Speed 60 RPM |
ASTM D2265 0-400c Lubricating Grease Dropping Point Testerd SH3498 Automatic wide temperature drop point meter
MODEL: | SH3498 |
---|---|
Temperature Range: | Room Temperature ~ 400 ℃ |
Number Of Test Routes: | 2 |
ASTM D4049 Spray Tester For Determining The Resistance Of Lubricating Grease To Water Spray
MODEL: | SY0643 |
---|---|
Applicable Standards: | ASTM D4049 SH/T0643 |
Working Water Pressure: | 40psi±1psi |
ASTM D942 - Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method Significance and Use
Applicable Standards: | SH / T0325 ASTM D942 |
---|---|
Input Voltage: | AC220V ± 10% 50Hz |
Temperature Control Range: | Room Temperature -150 ℃ |
Petroleum products and lubricants Determination of acid number potentiometric titration Automatic pH meter
Measurement Range: | 0.05 ~ 0.5mg KOH/g |
---|---|
Measurement Range:: | -2000.0- 2000.0 MV |
Basic Error: | 0.1F ±0.1 MV |